Yahoo! My quilt is now underway! After laying out all the pieces, moving the hexagons around until the colors blended and flowed from one area to another.

Here is a preview photo of my design, with the first row (on the left) sewn together. You can see the design shrinks quite a bit once the seams are sewn together!

When sewing the rows together, I use a slick trick that I developed when sewing a previous quilt−my Indian Summer Thousand Pyramids quilt.

Using an ordinary 1″ wide roll of painter’s tape, begin applying tape at one end of a long row of loose pieces. Press firmly as you apply the tape, securing all the loose pieces to the single piece of tape. Gently lift the tape & pieces, carrying them to your sewing table.

Begin sewing ANY project by establishing an accurate seam allowance. When you resume sewing, double-check your seam allowance to verify you always sew with the same seam. This one step will insure every project you sew will fit together much more accurately. I use one of two seam allowance tools, pictured below.

Lower the needle into the scant 1/4″ hole BY HAND. Lower the presser foot. Apply a raised guide such as stacked painter’s tape, or Q Tools vinyl tape to the right edge of the tool.

or use the Jan Krentz Corner Marking tool (designed for seam accuracy and marking tips and edges of diamonds for 8-pointed stars).

NEXT blog entry >>>> PIECING TECHNIQUE!